TC Drawing Dies and Taper Inserts

We use the best quality tungsten carbide nibs sourced from Kennametal, Sandvik Hyperion, and other globally reputed nib manufacturers.

Our selected nibs comprise fine-grain (one micron or lesser) tungsten and six percent cobalt for all wire drawing applications. In special cases, we use nibs with a higher percentage of cobalt. We choose tungsten carbide nibs of hardness between 1600 and 2100 HV30 based on the drawing application and or customer demand. We offer both DIN and ISO standard tungsten carbide nibs.

Our own designed and manufactured TC drawing dies and taper inserts high-speed, state-of-the-art ensures that each die is uniformly ground with blended profiles and the mirror polished with good roundness.

Our quality assurance department uses stereo microscopes for visual inspection and Conoptica of TC drawing dies and taper inserts to ensure accurate size, close tolerances on reduction angle, and bearing length.

Our TC drawing dies and taper inserts are durable and give long life because of the right selection of raw materials, proper mounting, and accurate geometry as per customer specifications.

We also create specification charts of TC drawing dies and taper inserts after comprehensive discussions with new customers or applications. We maintain a robust stock of raw materials to ensure quick deliveries.

Try our latest innovation – SMTC dies – a boon for the hard and dry drawing industries.

We supply tapered TC inserts as per customer drawings and demand in the range of 0.500 to 15 mm.

We use the best quality tungsten carbide nibs from globally reputed manufacturers.

Our controlled manufacturing process and quality assurance ensure that each die comes with an ordered profile and contains the highest polishing.

Our finished taper inserts are tested for high speeds of around 27 meters/second for hard metal drawing applications.

Try our latest innovation – SMTI dies – a boon for the high-speed hard and dry drawing industries.